ZOLL M Series Manual

NON-INVASIVE BLOOD PRESSURE (NIBP)
10 ZOLL M Series Operator’s Guide - Option Insert
Figure 7 Cuff Inflation Menu
On M Series CCT units, the “Inflation Pressure” field is labeled “Adult Inflation Pressure”,
“Pediatric Inflation Pressure”, or “Neonatal Inflation Pressure” if the Patient Type is set to Adult,
Pediatric, or Neonatal respectively.
2. Press the Next softkey if “Inflation Pressure” is not highlighted.
3. Press the Inc or the Dec softkey to select cuff inflation pressure.
4. Press the Return softkey (twice on M Series CCT units) to return to the NIBP menu.
The cuff inflation pressure is set.
Turning Off
Auto Adjust
You should turn off the Auto Adjust feature in situations where the M Series unit might inflate the cuff
to levels that can cause discomfort or harm to the patient. For example:
• Patient is being transported over a very bumpy road.
• Patient is moving the monitored arm.
• Patient is a small child or infant.
When you turn the Auto Adjust feature off, the M Series unit repeats the same cuff inflation pressure
for every measurement. Because this method does not readjust to the patient’s previously measured
blood pressure, do not use fixed cuff inflation pressures unless you have received the proper training.
To turn off Auto Adjust:
1. Press the Cuff Inflation softkey from the NIBP menu. If the Cuff Inflation softkey is not
displayed, see "Displaying the NIBP Menu" on page 7.
NOTE On M Series CCT units, you access the Cuff Inflation softkey from the NIBP Settings menu. Press
the Settings softkey from the NIBP menu, then press the Cuff Inflation softkey. If the Settings
softkey is not displayed, see "Displaying the NIBP Menu" on page 7.
The M Series unit displays the Cuff Inflation menu.
Figure 8 Cuff Inflation Menu
2. Press the Next softkey until “Auto Adjust” highlights.
3. Press the Inc softkey until “OFF” displays.
Figure 9 Auto Adjust Menu
4. Press the Return softkey (twice on M Series CCT units) to return to NIBP menu.
The M Series unit repeats the selected cuff inflation pressure for every measurement.
Inc Dec
Prev
Next
Return
Inflation Pressure
Auto Adjust
160 mmHg
160 mmH
g
On
j
g
Inc Dec
Prev
Next
Return
Inflation Pressure
Auto Adjust
160 mmHg
160 mmH
g
On
j
g
Inc Dec
Prev
Next
Return
Infl
ation Pressu
r
e
Auto Adjust
160 mmH
g
Off
g

ZOLL M Series Specifications

General

Pacer Rate	30 - 180 ppm
Display Type	LCD
Defibrillator Type	Manual and AED
Monitor Display	High-resolution LCD
ECG Monitoring	3-lead
Pacing	Demand
Battery Type	Lithium-ion
Display	High-resolution LCD
Waveform	Biphasic Truncated Exponential (BTE)
Monitoring Parameters	ECG, SpO2, EtCO2, NIBP, temperature
Connectivity	Data port for data transfer
Pacer Type	Transcutaneous
Pacer Output	0 - 140 mA
Printer	Integrated thermal
Energy Selection	2, 3, 5, 7, 10, 15, 20, 30, 50, 70, 100, 120, 150, 200 Joules