Key1, 2, 3, 4: Input WEP key characters here, the number of characters must be
the same as the number displayed at WEP Mode. You must enter at least one
encryption key here, and if you entered multiple WEP keys, they should not be same
with each other.
4.5.3 802.1X Enterprise
This security mode is used when a RADIUS server is connected to ZEW3003. IEEE
802.1x is an authentication protocol. Every user must use a valid account to login to
ZEW3003 before accessing the wireless LAN. The authentication is processed by a
RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not
encryption the data during communication.
Radius Server IP: Input the IP address of Radius server here.
Radius Port: Input the port number of the Radius server here. Default value is
1812.
Radius Password: Input the password of Radius server here.
WEP: Select enable 64 bit WEP, 128 bit WEP or Disable WEP encryption which
indicates the authentication process between wireless adapter and ZEW3003.
To Next Page
Loading...
Need help?
General