27
Chapter 5. Troubleshooting
Q1: If you have trouble connecting to the Internet, try the following steps.
1. Power off the Cable/DSL modem, ZEW3003, and computer and wait for 5 minutes.
2. Turn on the Cable/DSL modem and wait for the lights on to settle down.
3. Turn on ZEW3003 and wait for the lights on to settle down.
4. Turn on the computer.
5. Reconfigure ZEW3003 as described in Chapter 4.
6. Login to ZEW3003 and select the System Status tab.
7. Verify the IP Address, Default Gateway, have valid numbers assigned to them.
Q2: If my network's IP is different than the Access Point's range, what should
I do?
You should still configure ZEW3003 first. After all the settings are applied, go to the
ZEW3003’s configuration page, click on TCP/IP settings and change the IP address of
ZEW3003 to match your network's IP.
To Previous Page
Loading...
Need help?
General