Configuration from Embedded Web Server
5 - 22
Installation Procedure
1. At your file server console, type “load install”.
2. Select “NCF files options”.
3. Select “Edit AUTOEXEC.NCF file”.
4. Add or Modify the “SET BINDERY CONTEXT =” line
to include the NDS organization (O) and all
organization unit (OU) objects where users are
located. For example: SET BINDERY CONTEXT =
O=ABC; OU=SALES.OU=ABC-USA.O=ABC;
OU=TECH.OU=ABC-USA.O=ABC ;
5. When done, save the new AUTOEXEC.NCF file.
Please restart your NetWare file server in order for
new settings to take effect immediately.
6. Next, please refer to “Auto Setup” section in this
chapter to finish installing your print server.
7. Log into your NetWare file server as a Supervisor
(Admin.) or equivalent via a Bindery connection.
8. Run NetWare’s PCONSOLE and add users to the
“Queue Users” list.
9. From your NetWare client computer, such as
Windows 95/98/Me, create a printer that is connected
(redirected) to the NetWare print queue serviced by
the print server.
Note: Please refer to NetWare’s Print Server/Services
manuals for detailed PCONSOLE commands.
To Next Page
Loading...
