Network Print Monitor
6 - 6
Windows 95/98/Me/NT/2000/XP
Installation Procedure
Please perform the steps as follows to ensure a smooth
installation:
1. Run Setup from the print server’s NetWare, Win
95/98/Me/NT/2000 Setup diskette
2. The Network Print Monitor for Windows
95/98/Me，NT/2000/XP Setup will then appear. Click
Next.
3. A message reading, “Setup is complete. You may add
the Network Print Port by using the PSAdmin” will
appear. Click OK.
4. Click Start, point to Settings, and select Printers.
5. Double-click the Add Printer icon.
6. Select Local Printer and click Next.
7. Select the appropriate printer manufacturer and
printer type and click Next.
8. Select LPT1 and click Next.
9. Type in the Printer Name and click Next.
To Next Page
Loading...
