TCP/IP LPR Port Printing Installation
7 - 13
You can enter a printer name you like in this option.
d. Is xxxx a remote printer or a local printer (r/l)
---------> r
e. Please enter the name of the remote host that
xxxx is attached to: ---------> the Print server‘s IP
address you specified in Step 2, for example,
192.72.214.103
Note: You can add the host name associated with the IP
address in the /etc/hosts file. If you have done this,
please use the host name instead of the IP address.
f. Printer xxxx is connected to host 192.72.214.103
Is this correct ? (y/n) ---------> y
g. After it shows some messages, it will ask you a
question.
If you‘re not sure, answer ’n‘ ? (y/n) [n] --------> n
h. Would you like this to be the system default
printer ? (y/n) [n]------->answer this question if you
like to make it as a default printer.
i. Do you want to install or remove printing (i/r/q) ?
[q] : -------> q
j. Do you want to star remote daemon now (y/n)
--------> y
11. Done. Submit print jobs by using “lp” or “lpr”
command.
For example: lp -d printer-1 /etc/printcap
To Next Page
Loading...
