Field Entry
Channel
Refers to the wireless network channel assigned to your LAN. By
default, the router uses channel 10.
Wireless Mode
Accept the default, B/G/N mixed if the client devices on your network
use various wireless standards. Otherwise, select the wireless
standard used by all wireless devices on your network. Having a
single standard will speed up the wireless throughput.
Authentication Select WPA-PSK/WPA2 PSK if your devices support both
authentication methods. Optionally, select WPA-PSK or WPA2-PSK if
all devices on your network support only one of the authentication
methods.
802.1X
Refers to the optional authentication method for Radius servers. To
enable 802.1X, click the Enable radio button. Otherwise, accept the
default, Disable.
Encryption Select TKIP/AES, which supports dynamic encryption keys using TKIP
or AES algorithms. Select AES if you chose WPA2-PSK for the
authentication method. Select TKIP if you chose WPA-PSK for the
authentication method.
Preshare Key In the Preshare Key field enter a value for the key. The maximum
value is 32 characters. The minimum value is 8 characters.
Write your key in the space below for future reference, and then
enter it in the Preshare Key field:
— — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — —
WEP Configuration
Wired Equivalent Privacy (WEP) is a basic encryption method that does not offer the
security strength of WPA or WPA2. Use this method if some of your network's
wireless devices, such as a gaming console, do not support WPA2/WPA.
Important! If you choose to configure your router using WEP encryption, then you
must configure all devices on your wireless network with the same WEP encryption
method and key.
1 To configure WEP encryption, select Advanced > Basic Setting > Wireless to open the
Wireless Setting page.
2 Select or enter values in the following fields:
28 3G Wireless-N Router User Guide
To Next Page
Loading...
