• Encryption WEP Key 1, 2, 3, 4
If you selected Hex format and you chose a 128-bit key length, 26
hexadecimal values are required. Write the 26-hexadecimal key in the
space below for future reference, and then enter it in the Key 1 box.
— — — — — — — — — — — — —
— — — — — — — — — — — — —
If you selected Hex format and you chose a 64-bit key length, 13
hexadecimal values are required. Write the 13-hexadecimal key in the
space below for future reference, and then enter it in the Key 1 box.
— — — — — — — — — — — — —
If you selected ASCII format, and you chose a 128-bit key length, 13
ASCII characters are required. Write the 13-ASCII-character key in the
space below for future reference, and then enter it in the Key 1 box.
— — — — — — — — — — — — —
If you selected ASCII format, and you chose a 64-bit key length, 5 ASCII
characters are required. Write the 5-ASCII-character key in the space
below for future reference, and then enter it in the Key 1 box.
— — — — —
2 Click WPS Setup to launch the WiFi Protected Setup (WPS) Setup program. For
instructions, please refer to
WPS Configuration on page 25.
3 Click WDS Setting to open the WDS Setting page. For instructions, please refer to WDS
Configuration on page 30.
The Change Password Page
You can use this page to change your login password. To view or change
configuration settings, you must enter a password. Your router has a default
password (admin) that was set by the factory and that you used to access the
Configuration Manager initially. To safeguard your configuration, particularly if you make
changes, we recommend that you change the login password.
40 3G Wireless-N Router User Guide
To Next Page
Loading...
