Need help?Do you have a question about the Zoom 4501 and is the answer not in the manual?
General| Brand | Zoom |
|---|---|
| Model | 4501 |
| Category | Wireless Router |
| Language | English |
Provides steps to access and use the Configuration Manager, including login and selecting Wizard or Advanced.
Instructions on how to reset the router to its default factory settings using the RESET hole.
Details the steps to access the router's Configuration Manager via a web browser.
Details selecting the correct WAN connection type based on the ISP's protocol.
Provides explanations for different WAN types like Static IP, Dynamic IP, PPPoE, PPTP, L2TP, and 3G Cellular Modem.
Details configuring the 3G modem, including APN, PIN, Dialed Number, Account, and Password.
Introduces configuring wireless security and encryption methods.
Details selecting authentication (WEP, WPA-PSK/WPA2-PSK) and encryption methods.
Explains WPA-PSK/WPA2-PSK settings, encryption types (TKIP/AES), and Preshare Key.
Describes WEP settings, including authentication and encryption for older devices.
Explains WPA2/WPA configuration, including authentication and encryption.
Introduces the Basic Settings page for configuring WAN connection type and LAN IP address.
Explains how to use the Basic Setup page for LAN and WAN configuration.
Explains how to configure DHCP server settings.
Guides on configuring wireless LAN setup, including SSID, channel, and mode.
Explains selecting authentication methods like WEP, WPA-PSK/WPA2-PSK.
Details selecting encryption methods corresponding to authentication.
Explains how to open firewall ports for applications like online games.
Describes configuring a virtual server to allow external access to specific ports.
Explains how to control network access by analyzing incoming and outgoing packets.
Details controlling network access by analyzing packets based on IP addresses.
Guides on enabling or denying user access to specified URLs.
Details blocking LAN computers from connecting to predefined websites using keywords.
Explains enabling MAC Address Control and defining connection rights for clients.
Explains defining how and where system logs are exported via syslog or SMTP.
Explains Quality of Service (QoS) for prioritizing data flows and guaranteeing performance.
Explains enabling Dynamic and Static Routing for packet path definition.
Explains defining when services are turned on/off based on rules.
Guides on creating rules with names, policies, weekdays, start, and end times.
Introduces the Toolbox settings for system info, firmware, backup, reset, reboot, and miscellaneous.
Guides on upgrading the router's firmware to the latest version.
Details resetting the router to its factory default settings.
To Next Page
