1 Select or enter a value for the items displayed on the Wireless Setting page.
• Wireless Module
Accept the default, Enable. Click the Disable checkbox only if you do not want
wireless clients to access your network.
•
Network ID (SSID)
Refers to the
Service Set Identifier for your device. By default, the SSID for
the 3G Wireless-N Router is
Zoom. You can change the SSID to a name of
your choice. The SSID can be up to 32 alphanumeric characters. If you
change the name, make sure that all devices on your network use the new
SSID as the access point.
• SSID Broadcast
To hide your network's SSID name, which disables automatic broadcasting
of the SSID and makes the wireless access point (your router) invisible to
wireless clients on the network, click the Disable radio button.
•
Channel
Refers to the wireless network channel assigned to your LAN. By default,
the router uses channel 10.
• Wireless Mode
Accept the default, B/G/N mixed if the client devices on your network use
various wireless standards. Otherwise, select the wireless standard used by
all wireless devices on your network. Having a single standard will speed up
the wireless throughput.
• 802.1X
Refers to the optional authentication method for Radius servers. To enable
802.1X, click the Enable radio button. Otherwise, accept the default, Disable.
38 3G Wireless-N Router User Guide
To Next Page
Loading...
