Disabling Security
If for some reason you need to set up an unsecured network, you will need to disable the
default security that is currently set up for your Cable Modem/Router. Follow the
instructions below.
1 Open the Zoom Configuration Manager by typing the following in your Web browser's
address bar:
http://192.168.0.1
2 In the Login dialog box, type the following User Name and Password in lower case,
then click Login.
User Name: admin
Password: admin
3 Click Wireless on the top menu.
4 The Wireless Radio page appears. Under Select 2.4 or 5 GHz option, choose 5 GHz
and click Apply.
5 Then click Primary Network on the left-side menu.
6 Set all the following drop-down menus to Disable: WPA, WPA-PSK, WPA2, and
WPA2-PSK.
7 Click Apply.
8 Click Wireless Radio on the left-side menu. Under Select 2.4 or 5 GHz option,
choose 2.4 GHz and click Apply. Repeat steps 5-7 to disable security on the 2.4
GHz band.
That’s it! You have now disabled security.
33
To Next Page
Loading...
