L2TP/PPTP
The L2TP/PPTP page allows you to configure server and security settings. The L2TP
(Layer 2 Tunneling Protocol) and PPTP (Point-to-Point Tunneling Protocol) both allow
PPP frames to be tunneled through the network. PPTP is a Microsoft proprietary
protocol, which is very similar to L2TP.
To access the L2TP/PPTP page:
1 Click the Router menu tab.
2 Then click the VPN /L2TP/PPTP submenu.
Figure 33 shows an example of the menu and Table 33 describes the items you can
select.
Figure 33. Example of L2TP/PPTP Page
120
To Next Page
