Table 9. Access Control Menu Option
Option Description
Wireless
Interface
Select the wireless interface to configure the access control list.
MAC Restrict
Mode
Select whether wireless clients with the specified MAC address are
allowed or denied wireless access. To allow all clients, select
Disabled.
MAC
Addresses
Shows the list of wireless client MAC addresses to allow or deny
based on the Restrict Mode setting. Valid MAC address formats are
XX:XX:XX:XX:XX:XX
Connected
Clients
Shows the list of connected wireless clients. When a client
connects (associates) to the network, it is added to the list; when a
client leaves (disassociates) from the network, it is removed from
the list. For each client, the age (in seconds), estimated average
receive signal strength (in dBm), IP address, and host name are
presented. The age is the amount of time elapsed since data was
transmitted to or received from the client.
65
To Next Page
Loading...
