Zoom B3 - Patch Storage Configuration; Selecting Patch Storage Location; Confirming Patch Storage

13
Storing Patches
STORE/SWAP
3
To set where to store or swap the new patch
4
To complete patch storing/swapping
To change the patch number where stored/swapped
To change the bank where stored/swapped
• Turnoftherighteffect.
• Press.
• After“COMPLETE!”appearsonthedisplay,thestored/swappedpatchopens.
• Turnoftherighteffect.
NOTE
• The currently active patch
cannot be selected as the
destination.
• The current setting values
are automatically saved.
• To cancel this, press any
key instead of
.
HINT
Change the patch number
Change the bank