Zoom B3 - Advanced Patch Configuration; Accessing the TOTAL Menu; Adjusting Patch Level and Sound Balance

14
Setting Specific Patch Parameters
• Turnofthelefteffect.
Setting Specific Patch Parameters
1
To activate the TOTAL menu
2
To adjust the patch level
• Press.
NOTE
• Settings made for total
pa ra me te rs ar e s aved
separately for each patch.
NOTE
• Thesettingrangeis0-120.
PATCH CHAIN/NAME CTRL PDL/CTRL SW
• Tochangetheoverallvolumeofallpatches,adjustthemasterlevel
(see page 18).
HINT
• Turnofthelefteffect.
NOTE
• Thesettingrangeis0-100.Setto0foronlytheoriginalsoundor100
for only the effect sound.
3
To adjust the balance between original and effected sounds