Zoom B3 - Looper Audio Operations; Recording and Playback Operations; Adjusting Loop Volume Level

27
NEXT
Using the Looper
LOOPER
• Press.
4
To record a phrase and play it back
If set to “Manual”
If set to a note mark
• When is pressed again or the maximum recording time (about 40 seconds) is
reached, loop playback starts (and “PLAY” appears on the display).
• Recordingcontinuesforthesettimeandthenloopplaybackstarts(and
“PLAY” appears on the display).
NOTE
• Whenusingarhythm,recordingwillstartaftertheprecount.
• Whenusinga rhythm, the looptimingwillbe quantized, so
even if you stop the loop recording a little out of time, the
loop end point will be adjusted to match the tempo correctly.
NOTE
• Thesettingrangeis0-100.
• Duringrecording,press
to cancel recording.
HINT
• Turn of the right unit.
5
To adjust the loop volume
PlayingRecording