Zoom B3 - Looper Mode Management; Returning to Main Screens from Looper; Advanced Looper Settings

29
Using the Looper
LOOPER
9
To return to the Home Screens
• Press.
NOTE
• ReturningtotheHomeScreenswillnoterasetheloop.
• TurningthepowerOFFwillerasetheloop.
NOTE
• WhenUndoisON,the maximum looprecordingtimeis
limited to 20 seconds.
• You can return to the Home Screens while the loop is playing.
HINT
• Pressoftherightunit.
• To activate the Undo function
Turn of the right unit.
• To select the STOP MODE
Turn of the right unit.
• To adjust the RHYTHM LEVEL
Turn of the right unit.
• Even when set to“FINISH”or“FADEOUT”,you can stoploop playbackimmediately by pressingand
holding down .
HINT
• WhenUndoisON,youcancancelthelastoverdubbingbypressingfor1second. 
After undoing, you can also redo by pressing for 1 second again, restoring the last overdubbing.
HINT
STOP MODE How loop playback stops
STOP Playback stops immediately
FINISH Playback stops after the loop plays to its end
FADE OUT Playback stops after fading out
To change the Looper settings