10 11
MODULATION / SFX
10 11
Tremolo This effect varies the volume at a regular rate.
Parameter1 Parameter2 Parameter3
Page01
Depth 0–100 P Rate 0–50 P
Level 0–150 P
Adjust the depth of the modulation. Adjusts the rate of the modulation. Adjusts the output level.
Page02
Wave
UP 0–UP 9,
DWN 0–DWN 9,
TRI 0–TRI 9
P
Sets the modulation waveform.
Slicer This effect creates a rhythmical sound by continuously slicing the input.
Parameter1 Parameter2 Parameter3
Page01
PTTRN 1–20 Speed 1–50 P
Bal 0–100 P
Sets effect pattern.
Sets modulation speed.
Adjusts the balance between original
and effect sounds.
Page02
THRSH 0–50 Level 0–150 P
Adjusts effect threshold. Adjusts the output level.
Phaser This effect adds a phasing variation to the sound.
Parameter1 Parameter2 Parameter3
Page01
Rate 1–50 P
Color
4 STG, 8 STG,
inv 4, inv 8
Level 0–150 P
Sets the speed of the modulation. Sets the tone of the effect type. Adjusts the output level.
Page02
Vibrato This effect automatically adds vibrato.
Parameter1 Parameter2 Parameter3
Page01
Depth 0–100 Rate 0–50 P
Bal 0–100 P
Sets the depth of the modulation. Sets the speed of the modulation.
Adjusts the balance between original
and effect sounds.
Page02
Tone 0–10 Level 0–150 P
Adjusts the tone. Adjusts the output level.
TheVibe This vibe sound features unique undulations.
Parameter1 Parameter2 Parameter3
Page01
Speed 0–50 P Depth 0–100 P Bias 0–100 P
Sets modulation speed. Sets the depth of the modulation.
Adjusts bias of waveform modulation.
Page02
Wave 0–100 P Mode VIBRT, CHORS Level 0–150 P
Adjusts modulation waveform. Sets effect to vibrato or chorus. Adjusts the output level.
Detune
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
type has a chorus effect without much sense of modulation.
Parameter1 Parameter2 Parameter3
Page01
Cent -25–25 PreD 0–50 Mix 0–100 P
Adjusts the detuning in cents, which
are fine increments of 1/100-semitone.
Sets the pre-delay time of the effect
sound.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150 P
Adjusts the tone. Adjusts the output level.
StereoCho This is a stereo chorus with a clear tone.
Parameter1 Parameter2 Parameter3
Page01
Depth 0–100 P Rate 1–50 P Mix 0–100 P
Sets the depth of the modulation. Sets the speed of the modulation.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150 P
Adjusts the tone. Adjusts the output level.