Zoom GFX-1 User Manual

10
ZOOM GFX-1
Selecting Patches for Play
To try out the GFX-1, we recommend that you simply play your
instrument while switching patches.
HINT
Power-on
Set GFX-1 to
play mode
Immediately after turning on
power to the GFX-1, the unit will
be in play mode even if the
[PLAY/EDIT] selector is set to a
different position.
Switch patches
Connect your instrument and guitar amp to the GFX-1,
and then set the [POWER ON/OFF] switch on the rear
panel to ON.
Turn on the guitar amplifier and adjust the volume to a
suitable position.
When the [PLAY/EDIT]
selector is set to a
different position, set it
to "PLAY".
The currently selected bank
and patch number are shown
on the display
To switch patches in play
mode, use the foot
switches [1] - [4].
Bank
Patch number
GFX1(E).fm 10 ページ ２００４年９月９日 木曜日 午後５時１８分

Zoom GFX-1 Specifications

General

Brand	Zoom
Model	GFX-1
Category	Computer Hardware
Language	English