In play mode, the name of the currently selected patch is shown on the display.
The group and bank number of the patch can be checked on the GROUP/BANK indicator.
Patch name Group Bank number
• For details on patch/bank/group
switching, refer to p. 10.
* If you press the foot switch whose LED is lit, the GFX- 8
goes into the bypass condition.
To switch the patch within the same bank, press one of the foot switches 1 - 4
whose LED is not lit.
To switch to a patch from another bank
number or group, use the BANK
UP/DOWN foot switches and the foot
switches 1 - 4 to select the bank number
and group.
RTM (real-time modulation) refers to changing an effect with the expression pedal in
real time.
Rock the expression pedal back and
forth.
• For information on effects that allow RTM control, see p. 30.
• For more information on the use of the expression pedal, see p. 41.
The effect changes as the expression
pedal is moved. The parameter that is
controlled can be programmed for each
patch. Try out this function to see which
parameter changes for the stored patches.
The expression pedal incorporates a
switch that operates when the pedal is
pushed firmly down. The switch turns the
module for which RTM control is possible
on and off.
Push the expression pedal fully down.
Selecting the patch/bank number/group
To alter the effect with
RTM
Move back and forth Push fully down
To Next Page
Loading...
Need help?
General
