Zoom H2next - Recording Mode Details and Saving; Selecting Recording Mode; Adjusting Stereo Width (S Level); Selecting Save Location

Recording
Selecting the recording mode
12
Selecting the recording mode
1.
Turn so that the triangle points to the desired mode.
2.
Make settings for the recording mode.
Adjusting the S level (MS stereo, 2ch/4ch surround modes)
You can adjust the stereo width (S level) before recording.
1.
Use to adjust the stereo width.
NOTE
· The 4ch surround mode can only be used
when an SD card is in the unit.
· In 4ch surround mode, only WAV formats
(44.1/48kHz, 16/24bit) can be used.
· In 4ch surround mode, two stereo files are
created (MS mic recording and XY mic
recording).
NOTE
Set to OFF or between –24 and +6 dB.
Wide NarrowThe graphic changes along with the value