Recording
Recording manually
16
1.
Turn to adjust the input level.
1
3
2, 4
HINT
· Adjust the MIC GAIN so that the peak level stays around -12 dB.
· If an input signal is too strong, the MS/XY indicator on the top will flash
immediately.
2.
Press to start recording.
3.
Press to add a mark.
4.
Press to stop recording.
NOTE
· One file can have a maximum of 99 marks.
· During recording, if the size of the file exceeds 2 GB, recording will continue in
a new file that will be created automatically.
Recording manually
To Next Page
Loading...
