Zoom H2next - Powering and Installing the Recorder; Powering the Recorder; Installing an SD Card

Preparation Setting the date and time
07
H2n Handy Recorder
Setting the date and time
1.
Press .
2.
Use to select SYSTEM, and then press .
3.
Use to select DATE/TIME, and then
press .
5.
Use to select OK, and then press .
The date and time is added to recording files automatically, so set it correctly
whenever the batteries are replaced.
4.
Adjust the settings.
Use to move the cursor
Press to select the item
Use to change the value
Press to confirm the setting