Zoom H2next - Powering the Recorder; Using Batteries; Using an AC Adapter (Sold Separately)

Preparation
Powering the recorder
04
NOTE
· Use alkaline or nickel-metal hydride batteries.
· If the “Low battery!” warning appears, turn the power OFF
soon and put in new batteries.
· Use MENU > SYSTEM > BATTERY TYPE to set the type of
battery so that the amount of remaining battery charge can
be shown accurately.
Preparation
Powering the recorder
1.
Turn the power OFF, and then remove the battery cover.
1.
Connect the cable to the USB port.
3.
Close the cover.
2.
Insert batteries.
2.
Plug the adapter into a power outlet.
Using batteries
Using an AC adapter (sold separately)
Press here
and slide down