13
The Graphic EQ lets you adjust the tone of the Master Out.
The G-EQ is only controllable from the L-20 Control application. Graphic EQ set-
tings are stored on the
.
1.
Tap the button in the toolbar.
2.
Turn the G-EQ on by tapping .
3.
Slide the faders up to increase gains or down to decrease gains at desired
frequencies.
2
Graphic EQ
3
NOTE
· To make fine adjustments, tap the fader cap, slide your finger to right or left and then up and
down.
· Double-tap a fader to reset it to the default value.
· Tapping
sets all faders to 0 dB.
· If the
is turned off and on again, the graphic EQ will be set off.