Zoom LiveTrak L-20 Control User Manual

19
3.
Launch L-20 Control on a remote device.
4.
Hub devices that can be connected appear on the remote device.
If this does not appear, tap the
key to show it.
5.
On the remote device, tap the device name/ID under HUB DEVICES to connect
them.
6.
A message confirming connection with the remote device appears on the hub
device. Select “Yes” to accept the connection.
When connection succeeds, an icon showing the number of connected devices
appears at the bottom right of the hub device screen.
On the remote device, the icon in the toolbar changes to a REMOTE
MODE icon.
NOTE
· Only MONITOR OUT A-F can be controlled from a remote device.
· Only pre-fader levels can be shown by the level meters on the remote device.

Zoom LiveTrak L-20 Control Specifications

General

Brand	Zoom
Model	LiveTrak L-20 Control
Category	DJ Equipment
Language	English