Zoom PodTrak P8 - Page 9

9
■
Setting noise reduction and recording le types
After setting the date/time and language, the noise reduction on/off and recording file type
settings screen opens.
Recording le settings
Off:: Only record podcast stereo les.
Original Data: In addition to podcast stereo les, also record the input signals of each
channel to separate les on the SD card at the same time.
With Tone & Comp: In addition to podcast stereo les, also record the input signals of
each channel after adjustment to separate les on the SD card at the same time.
Noise Reduction on/off setting
When multiple mics are being
used to record sound, the noise
reduction function of the P8
suppresses background noise to
a constant level by automatically
reducing the levels of the mic
inputs not being used by people.
Tap when nished making
settings.
The noise reduction and recording file settings can be changed later by tapping on the
Home Screen.
■
Connecting mics
INPUT SELECT switches 1–6
Set to
when using a dynamic
mic or to
when using a
condenser mic. Gain will be set
suitably for the selection.
MUTE buttons 1–6
Conrm that these are not lit.
2: HOT
1: GND
3: COLD
ON AIR buttons 1–6
Conrm that these are lit.
Track buttons 1–6
Tap to adjust mic gain and audio
quality (
page 11).
Mic
Use a mic cable (with an XLR connector)
to connect to input jacks 1–6.
NOTE
When an INPUT SELECT switch is set to , +48V phantom power is supplied to that input jack.
When connecting a device that is not compatible with phantom power, do not set the INPUT
SELECT switch to
. Doing so could damage the device.