Zoom X3 - Page 21

Chapter 4: Advanced Setup Options 21
Advanced
Setup
Routing
Set up the routes on which you want the X3 or X4
to send data it receives on a particular interface
(for example, LAN interface, Ethernet interface,
etc.) Routes specify the IP address of the next
device interface or Internet destination to forward
data to, given the ultimate destination of the data.
Advanced
SetupÆ DNS
DNS Server
Allows you to Enable Automatic Assigned DNS.
The modem will accept the first received DNS
assignment from one of the PPPoA, PPPoE or
1483 Bridged IP + NAT enabled PVC(s) during
the connection establishment. If the ‘Enable
Automatic Assigned DNS’ checkbox is not
selected, enter the primary and optional
secondary DNS server IP addresses.
Advanced
SetupÆ DNS
Dynamic DNS
Allows you to alias a dynamic IP address to a
static hostname in any of the many domains,
allowing your DSL router to be more easily
accessed from various locations on the Internet.
Allows WAN users access to router WAN IP using
URL (ex. zoomdvt.dyndns.org) without having to
know the IP address. If router WAN IP changes,
the URL will still work.
Advanced
Setup
DSL
Allows you to select the modulation and capability
of DSL Settings.
Changing Your WAN Settings
Use the WAN Configuration page to change your Wide Area
Network (WAN) settings. To open this page, click the WAN link
under Advanced Setup on the left pane.
To Edit a Previous Configuration:
If you already created a configuration (from the Basic Setup page
or from the WAN page at an earlier time), you can click Edit to