Zoom X3 - Page 37

Appendix C: TCP/IP Network Settings 37
3 On the right pane, select Using DHCP from the Configure
drop-down menu. All of the text fields should be left blank.
4
Click Apply.
Mac OS X 10.4 and 10.3
1 From the Dock or Apple menu, select System Preferences
and then Network.
2
Select your connection method, normally Built-in Ethernet
for a wired connection.
3
Make sure the TCP/IP tab is selected, and then select Using
DHCP from the Configure IPv4 drop-down menu. All of
the text fields should be left blank.
4
Click Apply Now.
Mac OS 7.6.1 - 9.2.2
1 From the Apple menu, choose Control Panels and then
TCP/IP to display the TCP/IP Window.
2 Under Connect via:, select Ethernet built-in.
3 Under Configure:, select Using DHCP Server. Do not enter
anything in the DHCP Client ID field.
4 Close the TCP/IP Window. You will be asked if you want to
save the changes. Click Save.
5 Continue with Establishing Communication on page 8.