Appendix C: TCP/IP Network Settings 39
5 In the Local Area Connection Properties dialog box,
highlight Internet Protocol Version 4 (TCP/Ipv4) and click
the Properties button.
6 Select Use the following IP address and enter 192.168.1.100
and 255.255.255.0 as the IP address and Subnet mask,
respectively.
7 Click OK, then click Close.
8 Re-enter 192.168.1.1 in your Web browser’s address bar.
Windows XP
1 Open the Internet Protocol (TCP/IP) Properties dialog
box.
a From the desktop, click the Start button, point to Control
Panel, and then click Network and Internet
Connections.
b Click Network Connections.
c Right-click the Local Area Connection icon, and select
Properties.
d Select your NIC card’s TCP/IP entry (it should include
“TCP/IP” in it, but not “AOL,” “Dial-up,” or “Adapter”)
and click the Properties button.
2 Ensure the following is selected, depending on whether you are
using dynamic (DHCP) or static IP addressing:
¾ If you are using DHCP (most users): Ensure that Obtain
an IP address automatically is selected and that either
Obtain a DNS server address automatically or Enable
DNS is selected. All fields should be blank.
¾ If you are using a static IP address: Ensure that Use the
following IP address and Use the following DNS server
addresses are selected and that the correct IP address,
To Next Page
Loading...
