4
X5
ADSL Modem User’s Manual
1
Installation Instructions
1.1 Important! Before you Begin
Before installing your X5 ADSL modem, you must have DSL
service enabled on your telephone line. To do this, you need to
sign up with a DSL service provider. They will arrange to have
DSL enabled, and provide you with a User Name and Password (if
required) and the Communications Settings necessary to log on to
their network.
You will need your User Name and Password to complete the
installation, so please make sure you have them at hand.
User Name _________________________
Password _________________________
The following table lists some DSL broadband communications
settings. This table is intended for reference only. Typically you
should not need to enter this information; it should be
automatically supplied if needed as part of your service provider’s
installation procedure.
To Next Page
Loading...
Need help?
General
