Appendix B: Online Gaming with Your X5 45
Then you must perform these steps.
1
11
1
Load the PS2
Network Adapter Start-up Disc
that was
supplied with the PS2 network adapter.
2
22
2
Select
Get Connected
.
3
33
3
Select
Advanced Options
.
4
44
4
Select
Edit Network Configuration
.
5
55
5
Select the memory card where you have saved your network
configuration and select your network configuration profile.
6
66
6
Select
DHCP
, set it to
No
, and fill out these fields:
IP address=10.0.0.50
Subnet mask=255.255.255.0
Gateway=10.0.0.2
.
7
77
7
Set DNS to
No
and fill out these fields:
Primary DNS=10.0.0.2
Secondary DNS=10.0.0.2
.
8
88
8
Save under a different profile name.
9
99
9
Select
Save all changes
and run the diagnostic test.
When running a network game, please select the new profile.
Note:
Some online games require that you open up other,
specific ports in your computer’s firewall. Your game manual
should list which ports must be opened. If you need additional
guidance opening up ports, please refer to the
Virtual Server (Port
Forwarding)
section of this manual on page 22.
To Next Page
Loading...
Need help?
General
