©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
52
• provide proper temperature in the printing room, before starting the printing
process, make sure that the platform is sufficiently clean.
2. If the print cracks:
• make sure that the side covers are installed,
• make sure that the model is correctly designed and arranged in the workspace,
• try adjusting the print settings differently by changing the level of infill and the
model’s arrangement in the workspace,
• provide proper temperature in the printing room.
3. For further help, visit our Support Center at: http://support.zortrax.com/.
To Next Page
Loading...
