©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
55
If the device begins to operate in an unidentied way, safely unplug
the printer from the power supply and immediately contact the
Support Center specialists via the support form at: http://support.
zortrax.com/support-form/.
While shipping the device to the Manufacturer’s technical service, it
is extremely important to properly pack the printer. Use the original
packaging. Detailed instructions on how to pack the device are
available at: http://support.zortrax.com/m200-plus-packing/.
More manuals and tips & tricks articles are available at our Support Center.
www.zortrax.com
To Next Page
Loading...
