Note:
When more than two HDDs are installed in your computer, the Disks item will be selectable.
Then users can select the HDD that you want to belong to the RAID set. Please be noticed
that selecting a wrong disk will result in losing the original data of the HDD.
3. Press <Enter> to conrm the creation of the RAID set. A dialogue box appears to conrm
the action. Press <Y> to conrm; otherwise, press <N>.
4. The following screen appears, displaying the relevant information about the RAID set you
created.
Deleting a RAID set
1. In the main Intel(R) Rapid Storage Technology RAID BIOS menu, highlight Delete RAID
Volume using the #$ arrow key then press <Enter>.
2. Use the space bar to select the RAID set you want to delete. Press the <Del> key to delete
the set.
Installing Drivers And Software
To Next Page
Loading...
