20
Intel
®
NM10-ITX series Motherboard
q Execute-Disable Bit Capability
This function enhances protection of your computer , reducing exposure to viruses
and malicious buffer overow attacks when working with its supporting software
and system.
q Hyper Threading Technology
Enable this function for Windows and Linux4 OS, (OS supports Hyper Threading
Technology)
Disable this function for other OS. (OS not optimized for Hyper Threading
Technology)
q Congure SATA as
This item allows you to congure SATA as IDE/AHCI/Disabled mode.
q SATA Run Mode Conguration
This item allows you to congure the SATA run mode.
q Primary/Secondary IDE Master
This item allows you to press <Enter> to congure primary/secondary IDE master
This item will be effective only if the device is accessed through BIOS.
q IDE Detect Time Out (Sec)
The item allows you to select the time out value for detecting ATA/ATAPI devices.
ACPI Conguration
The items in this menu allow you to set General ACPI conguration, Advanced ACPI
Conguration and Chipset ACPI Conguration.
PCIPnP
The items in this menu show the function of PCI bus system and PnP. Press <enter>to
display the conguration options:
q Clear NVRAM
The items allow you to select whether clear NVRAM during system boot.
q Plug and Play O/S
When set to [No], BIOS congure all the devices in the system. When set to
[YES] and if you install a Plug and Play operating system, the operating system
congures the Plug and Play devices not required for boot.
q PCI Latency Timer
Allows you to select the value in units of PCI clocks for PCI device latency timer
register.
q Allocate IRQ to PCI VGA
When set to [YES], BIOS assigns an IRQ to PCI VGA card if the requests for an
IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even
if requested .
To Next Page
Loading...
Need help?
General
