To Next Page

To Previous Page

Intel

NM10-ITX series Motherboard

Exit Menu

The exit menu items allow you to load the option or failsafe default values for the BIOS

items, and save or discard your changes to the BIOS items. Press <enter> to display

the sub-menu:

Save Changes and Exit

Select this item and press <Enter> to save the changes that you have made in the

BIOS Setup and exit the BIOS Setup. When the diolog box [Save conguration

changes and exit setup?] appears, select [Ok] to save and exit, or select [Cancel] to

return to the main menu.

Discard Changes and Exit

Select this option only if you do not want to save the changes that you made to the

setup program. If you made changes to elds other than system date, system time,

and password, the BIOS asks for a conrmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the previously

saved values. After selecting this option, a conrmation appears. Select [Ok] to dis-

card any change and load the previously saved values.

Load Optimal Defaults

This option allows you to load the default values for each of the parameters on the

setup menus. When you select this option, a conrmation window appears. Select

[Ok] to load default values. Select [Cancel] to make other changes before saving the

values to the non-volatile RAM.

Load Failsafe Defaults

This option has been set by the manufacturer and represents settings which provide

the minimum requirements for your system to operate.

Zotac IONITX-U series User Manual

Questions and Answers: