Zotac IONITX-U series User Manual

25
Conguring the BIOS
FLASH Update Procedure
The program AFUDOS.EXE is included on the driver CD (X:\Utility\AFUDOS.EXE). Please follow
the recommended procedure to update the ash BIOS, as listed below.
(X: your CD driver letter).
1. Create a DOS-bootable oppy diskette. Copy the new BIOS le (just obtained or downloaded)
and the utility program AFUDOS.EXE to the diskette.
2. Allow the PC system to boot from the DOS diskette.
3. At the DOS prompt, type
AFUDOS XX.ROM /P /C /B /N /X <ENTER>
Note: XX (the BIOS le name) can be dened by users.
4. Wait until the ash-update is complete.
5. Restart the PC.
Warning: - Do not turn off or RESET the computer during the ash process.
- If you are not sure how to upgrade the BIOS, please take your computer to an
Authorized Service Center and have a trained technician do the work for you.

Zotac IONITX-U series Specifications

General

Brand	Zotac
Model	IONITX-U series
Category	Motherboard
Language	English