26
Intel
®
NM10-ITX series Motherboard
Installing Drivers and Software
Note: It is important to remember that before installing the driver CD that is shipped in the
kit, you need to load your operating system. The motherboard supports Windows
XP 32 bit/64 bit; Windows Vista 32 bit/64 bit and Windows 7 32bit/64bit.
The kit comes with a CD that contains utility drivers and additional INTEL software.
The CD that has been shipped with your Intel
®
NM10 motherboard contains the following
software and drivers:
q Intel chipset Driver
q HDA sound driver
q ION Graphics Driver
q Renesas USB3.0 Driver
q Realtek PCIE Network Driver
q Atheros Wireless driver
Note. We reserve the right to update the driver version presented in the manual. The driver
installation pictures shown in this section are for reference only.
Driver Installation
1. Insert the Intel
®
NM10 driver CD into the drive after loading your operating system, and then
you can see the interface below.
To Next Page
Loading...
Need help?
General
