Zotac NM10-DTX WiFi User Manual

21
Conguring the BIOS
Boot Menu
The Boot menu items allow you to change the system boot options. Press <Enter> to
display the conguration options:
Boot Settings Conguration
The items allow you to congure Boot settings. Press <Enter> To display the
conguration options:
q Quick Boot
Enabling this item allows the BIOS to skip some power on self tests while booting
to decrease the time needed to boot the system. When set to [Disabled], BIOS
performs all the POST items.
q Full Screen Logo
This option allows you to enable or disable the display of the full-screen logo
when the system boots. Use the <Page Up> and <Page Down> keys to toggle
between [Enable] and [Disable].
q AddOn ROM Display Mode
Sets the display mode for option ROM.
q Bootup Num-Lock
Allows you to select the power-on state for the NumLock.
q PS/2 Mouse Support
This item allows you to enable or disable support for PS/2 mouse.
q Wait for ‘F1’ If Error
When set to [Enabled], the system waits for the F1 key to be pressed when error
occurs.
q Hit ‘DEL’ Message Display
When set to [Enabled], the system displays the message “press DEL to run setup”
during POST.
q Interrupt 19 Capture
When set to [Enabled], this function allows the option ROMS to trap interrupt 19.

Zotac NM10-DTX WiFi Specifications

General

Brand	Zotac
Model	NM10-DTX WiFi
Category	Motherboard
Language	English