46
Intel
®
NM10 series Motherboard
SATA RAID User Manual
Users can set SATA RAID conguration through JMicron HW RAID Manag-
er. Please note that your system must have more than two SATA Hard disks
to set SATA RAID conguration.
JMicron HW RAID Manager
Note: Before using JMicron HW RAID Manager conguration, you must have
installed the JMB36X driver and JMB RAID Manager.
Introduction of JMicron HW RAID Manager
1. Double click the JMicron
®
icon in the lower right corner of the window.
2. The window of JMicron HW RAID Manager will appear. Click the icon ,
then RAID and Disk Information will display.
3. Click the icon , then Event Log Viewer will display.
To Next Page
Loading...
Need help?
General
