Zotac ZBOX NANO

25
ZOTAC ZBOX nano
ZOTAC nanoRAID User Manual
Setting up the BIOS
1. Setting your computer, then press <Delete> to enter BIOS SETUP UTILITY.
2. Use the arrow key to select Advanced menu. When enter the Advanced menu,
select the Item “Storage Conguration”.
3. Enter Storage Conguration > SATA Mode Selection, and select “RAID.”
4. Enable the disks that you want to use as RAID disks.
5. Press F10 to save the conguration and exit. The PC reboo
ts.
Note: The RAID is only available when two mSATA SSD modules are installed in
the ZOTAC nanoRAID adapter.