EasyManua.ls Logo

Zte Blade A72 5G - Wi-Fi Connections

Zte Blade A72 5G
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
4. Touch each item to enter the information you get from your
service provider.
5. Touch > Save to complete.
NOTE:
To set the APN to default settings, touch > Reset to default.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide
Internet access at distances of up to 100 meters, depending on
the Wi-Fi router and your surroundings.
To turn Wi-Fi on and connect to a Wi-Fi network:
1. Open Settings and touch Wi-Fi.
2. Slide the Use Wi-Fi switch to the on position to turn on Wi-Fi.
3. Touch a Wi-Fi network name to connect to it.
4. If the network is secured, enter the password and touch
CONNECT, or touch to scan the QR code of the
password when it is available.
NOTES:
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Your phone automatically connects to previously used Wi-Fi
networks when they are in range.
Your phone can automatically use mobile data network
when the Wi-Fi signal is weak. To use this feature, touch
Wi-Fi preferences below the network list in the Wi-Fi

Table of Contents

Other manuals for Zte Blade A72 5G

Related product manuals