the ONU is SFU (pure data)+ Routing, the ONU either works in SFU mode, or is
working in routing mode.
2.After the above configuration, click "create" button to complete the DHCP
broadband Internet access settings.
5.1.3 Static IP Broadband Internet Access In Routing Mode
1.web login ONU and select Network -> WAN -> WAN Connection, and then set
the following parameters:
【Connection name】Select "Create WAN Connection".
【New Connection name】According to own convenience to specify.
【Enable Vlan】This one can be set according to the network planning situation, if
the network planning Internet vlan, this one need to check the
"Enable vlan"; If the network is not planning Internet vlan, this one
does not need to check, then ONU is vlan transparent mode.
【Vlan ID】The same as "Enable Vlan", Setting depending on the network vlan
planning.
【802.1p】Set the priority of vlan, The same as "enable Vlan", depending on the
To Next Page
Loading...
