Zte MF286R - Accessing the Internet

10
2. Use your normal Wi-Fi application on the client to search for the
available wireless network.
NOTE:
Please set the client to obtain an IP address automatically, and the client
will get an IP address like “192.168.0.101”. For the detailed procedure,
refer to Conguring Your PC.
3. Select the SSID (Wi-Fi name) of your device, and then click
Connect.
NOTE:
Please check the label on your device to get the default SSID.
4. Enter the password and then click
OK.
NOTE:
Please check the label on your device to get the default password.
5. Wait until the client device is connected to your device successfully.
Accessing the Internet
Before accessing the Internet, please make sure that the following
operations are nished.
• Your device is connected to the terminal device via a network cable
or Wi-Fi.