14
1. Pick up the handset.
2. Key in the telephone number.
3. Press the
# key on the telephone to send the call, or wait 4～8
seconds for the call to be dialed automatically.
NOTE:
If there is no signal indication, the radio signal is unavailable. Change
the location of the device and make sure nothing is blocking it.
WPS Function
Your device supports WPS function. You can use this function to
connect the client to your device.
1. Power on your device, and start the WPS function.
2. Press the WPS button on your device to activate the WPS function.
3. Enable the WPS function on your client. Follow the system prompts
on your client to nish the connection.
NOTE:
For detailed operations on the client, refer to the corresponding product
instructions.
To Next Page
Loading...
