Zte MF60 - microSD Card Operations; About SIM Card

Hotspot Displays 'Insert SIM', And/Or Will Not Charge Or Power On
- When the mobile hotspot does not power on
- When the mobile hotspot displays “Insert SIM”
- When the mobile hotspot does not indicate that the baery is charging
⇒ Remove the SIM card, wipe off the metal contacts with clean cloth,
and reinstall it.
Li up the baery cover from the boom of the mobile hotspot,
then remove the baery.
Remove the SIM card by sliding in the direcon of the arrow
Wipe off the metal contacts with so clean cloth
Insert the SIM card and baery with the contacts located against
the metal springs and press the baery down in the case. Line the
baery cover up correctly and press gently to close the case.
7
Troubleshoong