Zte MF60 - Getting to Know Your Device

ZTE MF60 Quick Guide
2 Confidential and Proprietary Information of ZTE CORPORATION
Notes:
microSD
is a trademark of SD Card Association.
The device’s standby and working time are only for your reference, and based on ideal working
environment.
Getting to Know Your Device
The following figure shows the appearance of the device, it is only for your reference. The actual device
may be different.
Right Side Front Left Side Bottom
Interface and Buttons
1.Power Hold the Power button to switch on/off the
device.
2.Memory card slot (microSD card) It is where you insert the memory card (microSD
card).
3.WPS This button is used to start/end Wi-Fi Protected
Setup authentication process and enable/disable
the Wi-Fi function.
z Hold it for 3 seconds to activate the WPS
function.
z When the WPS function is available, press it to
deactivate the WPS function.
z Press it to enable/disable Wi-Fi function.
4. LED Screen It indicates the signal type, signal strength, battery,
Wi-Fi, etc.
5. External Antenna Connector It is used to connect an external antenna to enhance
the signal strength.
6.Charger/USB port z Charge your device.
z Connect the client to your device via USB
cable.