ZTE MF60 Quick Guide
Confidential and Proprietary Information of ZTE CORPORATION 3
Notes:
Hold the WPS and Power buttons simultaneously until the LED screen turns off, and then release the
buttons. The device will restart automatically and restore to the factory default settings.
LED Indicator
When the device is powered on, the following icons will appear on the LED screen, with the
corresponding indicates listed in the table below:
Icon Indication
Network signal strength.
Network type. 2G or 3G icon will appear on the LED screen according to the network
being connected.
Connect to the Internet automatically.
Connect to the Internet manually.
Roaming network indication.
New message received.
Wi-Fi Status and number of the connecting users.
Battery power indication.
Hardware Installation
Inserting SIM Card and Battery
1. Use the thumb catch at the bottom of the device to open the battery cover.
2. Insert the SIM card into the SIM card holder.
To Next Page
Loading...
