• Comment: Type comment for the filter settings.
Notes:
Filtering rules are matched one by one, if met this provision, it will not continue to match the rules listed
below.
Click Apply to confirm your configuration.
Click Delete to delete the rule which you selected.
Click Reset to clear what you select or input.
To add a new rule:
1. Select Enable in the Basic Settings area.
2. Click Apply.
3. Input the detail information in the Mac/IP/Port Filtering area.
4. Click Apply in the Mac/IP/Port Filtering area.
Port Forwarding
You can setup virtual servers to provide services on the Internet. Select Settings > Firewall > Port
Forwarding, the virtual server settings are shown in the following figure:
If you select Enable, the Virtual Server Settings will appear:
To Next Page
Loading...
